Anyone got a 2.2 legacy loom?

Rapidresto · Posted: Sun Dec 23, 2007 8:43 pm Post subject: Anyone got a 2.2 legacy loom?

I brought a ej 22 with ec and what i thought was a full loom. I've come to strip it down and it looks like someone has had a go at this already so i've now got no idea if its complete or if the wrong wires have been cut etc.

so rather than waste my time stripping down a loom that might be scrap anyway i thought i'd see if anyone has one for sale either complete or stripped down ready for vw use!

cheers
john

Vanhellsingvw · Posted: Sat Dec 29, 2007 5:29 pm Post subject:

Hi John,
if you look for a loom make shure to get one of the same year and model.

You can also try to get your loom fixed or modified by using the following diagramms that show the ECU pin out and the loom after it is modified for a VW (in this case a T3)

See: www.subarubus.de
downloads
take "Sehr guter Schaltplan"
and "Pinbelegung 90er 2.2L"

That´s all you need.
Since wire colours are sometimes different always go by number not by colour.

cheers Stefan

gazman · Posted: Mon Dec 31, 2007 2:06 am Post subject:

Ive got more wiring diagrams & pinouts here: http://www.geocities.com/gazman_4/wiringgallery.html
if that helps Grin

rjes · Posted: Mon Dec 31, 2007 7:07 pm Post subject:

Hello John,
Do you know what the damage is or what is missing from your EJ22 harness? I have a lot of experience with Subaru harness work, and can repair it if I have the right connectors to replace any which are missing. I do have some spare EJ22 connectors. If you initially thought it was complete, I assume there probably isn't much missing?
Also, Shropshire is not a million miles away from me (Cheadle, north Staffordshire), so if you wanted to bring the harness to me I could probably tell you whether it's beyond being worth repairing or not.
_________________
Regards,

Richard,

R J Engineered Solutions
Quality Subaru Powered VW Components
www.rjes.com

Rapidresto · Posted: Wed Jan 23, 2008 2:48 pm Post subject:

Cool had a mate (Si aka Roadi) come over on sat and sit with me in a mess of wires. Thankfully it looks like all is good and i've got all the right bits and nothing that i needed was missing!

some pics of the work in progress:

all sorted now and fingers crossed it'll work when i might get to start the engine at the weekend.

ricola · Posted: Wed Jan 23, 2008 3:28 pm Post subject:

Do you have any more pics of the conversion? Not may converted ghias about...
_________________
http://www.ricola.co.uk

Rapidresto · Posted: Wed Jan 23, 2008 3:47 pm Post subject:

ricola · Posted: Wed Jan 23, 2008 8:46 pm Post subject:

cool, I prefer the 'in build' pics, you can see how things are done better...
_________________
http://www.ricola.co.uk

Rapidresto · Posted: Thu Jan 24, 2008 1:31 pm Post subject:

yep will try and get plenty of pics as i build it back up, didn't take too many so far as its all umming and aaaring and making templates and seeing what'll work.

The teardown and rebuild should provide plenty of pics of what does work!

Hopefully!