| View previous topic :: View next topic |
| Author |
Message |
kruger
Wannabe
Joined: 12 May 2009
Posts: 5
Location: Luton
|
 Posted: Wed Oct 18, 2017 9:07 pm Post subject: Flywheel for EJ25 - what can be used? |
 |
|
Hi guys, not been on here for a long time, but now got a Legacy auto EJ25 to to put in to a T2 bay, I need to source a flywheel to mate upto to the Rjes adapter bit need to know what other flywheels fit - as EJ25 flywheels seem a bit thin on the ground -
So will EJ20, or EJ22 flywheels fit an EJ25?
Thanks in advance! |
|
| Back to top |
|
 |
Kai
Jedi Guardian
Joined: 14 Nov 2008
Posts: 1226
Location: Village life.... Enter the Vale
|
| Posted: Fri Oct 27, 2017 2:26 pm Post subject: |
|
|
I think flywheels come in auto, N/A & Turbo.
You can choose which ever one you like so long as you get the matching clutch.
Turbo clutches are pull to release and NA clutch are push to release.
Basically you want any NA flywheel and clutch from any EJ engine
_________________
Think......
Don't sleep and drive!!! |
|
| Back to top |
|
|
kruger
Wannabe
Joined: 12 May 2009
Posts: 5
Location: Luton
|
| Posted: Fri Oct 27, 2017 2:36 pm Post subject: |
|
|
| Kai wrote: | I think flywheels come in auto, N/A & Turbo.
You can choose which ever one you like so long as you get the matching clutch.
Turbo clutches are pull to release and NA clutch are push to release.
Basically you want any NA flywheel and clutch from any EJ engine |
Thats great, thanks, after a bit of digging about its the same conclusion I'd come to, hopefully this post is useful for anyone else converting auto to manual. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
