| View previous topic :: View next topic |
| Author |
Message |
coolyeti
Wannabe
Joined: 08 May 2013
Posts: 1
|
 Posted: Wed May 08, 2013 1:17 pm Post subject: splitscreen driveshafts/ 1300 gearbox |
 |
|
| Hi new to this forum hope someone make things clear , purchased a Brazilian splitscreen supplied with Subaru engine not fitted a 1300 gearbox not fitted my question is can I fit original spltter driveshafts to 1300 gearbox without to much fuss |
|
| Back to top |
|
 |
tuzza123
Force Sensitive
Joined: 26 Feb 2011
Posts: 24
Location: Cannock Staffs
|
| Posted: Wed Jun 19, 2013 4:31 pm Post subject: Drive shafts |
|
|
Has your van got still got the original gear box and reduction boxes if so these will have to be ditched and IRS suspension & drive shafts from either a beetle or early bay.
Fitting kits are available from quite few UK suppliers.
If it has got IRS (independent rear suspension) you will need the 1303 c/v joints on the gearbox only if using bus set and 1303 c/v joints on both drive shaft ends beetle set up.
My personal choice is early bay parts
https://www.facebook.com/media/set/?set=a.2644701604126.2139606.1453214181&type=1&l=5973b121e3 |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
