Connecting a modified Scooby loom to a bay window existing w

[Hayleyjosephfrances]

PLease could someone help me with a wiring question for my conversion. Simple really how and what do I need to connect to the scooby wiring loom to run the gauges at the front on the dash on my early bay window. Alternator light, oil pressure, ignition switch etc.... I am trying to collect all the information before I start the conversion. diagrams and descriptions would really help. Engine is a EJ20 non turbo. Thanks

Mark
_________________
Looking forward to reliability and a few less trips on a recovery truck

[Kai]

What year?

to make the vw gauges work you'll need to connect the alternator light and the oil pressure light.

you'll need to supply the loom with +12V, obviously a switched +12V, then you get into what the ECU will require, ecu memory +12V, vss, neutral position switch, radiator relays oh and you should install the engine chek light too.

and dont forget to install a coolant temperature gauge, another hurdle you'll have to over come.

loads of information in the forum though.
_________________
Think......

Don't sleep and drive!!!

[Thierri018]