| View previous topic :: View next topic |
| Author |
Message |
pmclok
Wannabe
Joined: 13 Aug 2012
Posts: 2
|
 Posted: Mon Aug 13, 2012 12:24 pm Post subject: os rear hub problem |
 |
|
Mucho good advice needed..have a T25 subaru ej22 converted bu the rjes boys..my cv to hub bolts keep undoing themselves after I've torqued em up correctly!!!! Alls well for 20miles then there's starts to go slack when drive is taken up..have tried new hex bolts and new anti-slip washers!!!! All suggestions welcome  |
|
| Back to top |
|
 |
Obonobo
Jedi Knight
Joined: 17 Nov 2010
Posts: 200
Location: Netherlands
|
| Posted: Mon Aug 13, 2012 3:25 pm Post subject: |
|
|
Are you also using the two-holed plates (you need them on the transmission-side, 3 pieces, both left and right)? Just asking. And a drop of Loctite should help.
_________________
Greetings from Sietze
-------
Driving a '75 Bay with a EJ22 '93 and 091 6-rib box.
And it's a long time since it looked anything like this! |
|
| Back to top |
|
|
pmclok
Wannabe
Joined: 13 Aug 2012
Posts: 2
|
| Posted: Mon Aug 13, 2012 7:17 pm Post subject: |
|
|
| Obonobo wrote: |
Are you also using the two-holed plates (you need them on the transmission-side, 3 pieces, both left and right)? Just asking. And a drop of Loctite should help. |
hi yep will try ht bolts and loctight again!!! |
|
| Back to top |
|
|
Kai
Jedi Guardian
Joined: 14 Nov 2008
Posts: 1226
Location: Village life.... Enter the Vale
|
| Posted: Tue Aug 14, 2012 6:36 am Post subject: |
|
|
I'm under the impression that's these are stretch bolts and would definetly need replacing in your case. Pretty sure if you went and bought a quality cv boot kit it should come with new bolts.
_________________
Think......
Don't sleep and drive!!! |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
