Front beam lowering kit

Superleggo · Posted: Mon Apr 02, 2012 9:17 pm Post subject: Front beam lowering kit

I am thinking of lowering the front suspension a couple of inches or so just to level the camper out again as since I have fitted the Zetec engine it sits down a bit at the bck due to the extra weight of the engine.

Red9 solution is magic but too pricy for me. Not got enought time at present to fabricate my own at present so what is the best solution?

Drop spindles are again not cheap.

Weld in adjusters? Are they ok or do they mess up the geometery?

Any thoughts welcome.

Obonobo · Posted: Thu Apr 05, 2012 4:11 pm Post subject:

Here in the Lowlands, many have fitted adjusters in combo with stiffer shocks (KYB). They seem to be fine. Re-alignment obviously required. It's a weekend job, according to my source (= friend who's done a few)
_________________
Greetings from Sietze
-------
Driving a '75 Bay with a EJ22 '93 and 091 6-rib box.

And it's a long time since it looked anything like this!