LAMBDA SENSOR THREAD SIZE ?

Auto · Initiate Jedi Joined: 30 Sep 2008 Posts: 47

Hi im having a stainless exhaust made can any one please tell me the lambda sensor thread size so i can get the correct size boss welded in to suit the sensor is it M18 ?
cheers phil

13 window deluxe · Posted: Sun Jul 25, 2010 12:26 pm Post subject:

most are m18 but they are a fine pitch
_________________
1964 rat 13 window deluxe 1Z tdi,
1975 rhd twin slider tintop (TBA)
1991 golf 2 gti with tweaked AHU tdi,

previous tdi swaps: gone but not forgotten
1979 rhd twin slider tintop bay ahu 1.9tdi
1990 T25 1Z 1.9tdi
1993 suzuki samurai with 1Z 1.9tdi

Auto · Initiate Jedi Joined: 30 Sep 2008 Posts: 47

Hi 13 wondow
the t25 door card is all fitted up and looking good, and the splits nearly ready for the first turn of the key too just needs an exhaust
the boss thats available is 1.5 pitch will that be ok ?
congratulations on the wedding
cheers phil

ricola · Posted: Sun Jul 25, 2010 5:35 pm Post subject:

I got a stainless boss from Jetex, it was about £5 from memory...
_________________
http://www.ricola.co.uk

rjes · Posted: Wed Aug 04, 2010 11:42 pm Post subject:

Yes, they are M18 x 1.5. Usually available on eBay too.
_________________
Regards,

Richard,

R J Engineered Solutions
Quality Subaru Powered VW Components
www.rjes.com