Search found 24 matches

hi mate , just reading all about your plans. i converted mine using a 1.8d from a van it had bosch fuel pump which you can wind out to give a bit more power. i even made the adaptor plate, exhaust an ...

any one got any info on changing a roof bellows and how they are fitted to the roof as i want to take mine off for painting

some more pictures of my diesel conversion. 091 box now fitted and mod to air scoop nobby

http://i80.photobucket.com/albums/j173/nobby_7/01-08-06_1418.jpg
http://i80.photobucket.co ...

yes it was me £205 on ebay. i jumped in at the last and won it. i had a trip of 300 miles , but a very,very,very good buy. the only problem is the input seal leaks so i will pop the engine out this we ...

i think on the peugeot it fits at the back of the engineat the top facing a groove in the reaf of the flywheel . some peugeots picked a pulse from the loom in the dash after a stabilizer.... go for ...

at last i have a 091 gearbox from a 1974 australian bay. just fitted it and the revs are in a better place . drives well , 70 mph crusin speed and the engine sounds 100% better. i have been camping fo ...

hi alex, like the suspension. just read that you have a 2ltr box on your 1.8diesel. i have a 1600 box on mine and its out of steam at 50mph . any ideas on 2 ltr gearboxes ratioes , availibility and pr ...

temp sits about normal and i can drive miles befor the fan starts and it goes out quickley. i went marlborough to raf kemble last week very hot day and no problems. i did add an extension to the scoop ...

now using my camper . the diesel works gggggrrrreeeeeaaaatttttt. and cools just fine . plenty of power now done about500 miles the fan pops on about every five miles depending on aif temp outside. no ...

hi , i had the same problem . you can fit a bush in the centre to support the rod , but this involves removing the engine to remove the rod. i drilled a small hole jost behind the front bush and fitte ...

hi, i didnt get a longer shaft but machined down the air cooled vw 1.6 flywheel nut which has the spigot bearing in it . i held it to the flywheel by three of the flywheel bolts and it protruded from ...

could anyone tell me the size of the fuel tank outlet pipe. mine looks about 6mm. has anyone fitted a different size outlet to allow for extra fuel demand for diesel applications. mu escort 1.8d runs ...